Submissions from 2016
Active Fault Tolerant Control for Vertical Tail Damaged Aircraft with Dissimilar Redundant Actuation System, Wang Jun, Wang Shaoping, Wang Xingjian, Shi Cun, and Mileta M. Tomovic
Quantitative Assessment of Secondary Flows of Single-phase Fluid through Pipe Bends, Z. Kaldy and O. Ayala
Use of Dynamic Visualizations for Engineering Technology, Industrial Technology, and Science Education Students: Implications on Ability to Correctly Create a Sectional View Sketch, Petros J. Katsioloudis, Daniel Dickerson, Vukica Jovanovic, and Mildred V. Jones
Impacts of Music on Sectional View Drawing Ability for Engineering Technology Students as Measured Through Technical Drawings, Petros J. Katsioloudis, Mildred Jones, and Vukica Jovanovic
Application of Visual Cues on 3D Dynamic Visualizations for Engineering Technology Students and Effects on Spatial Visualization Ability: A Quasi-Experimental Study, Petros Katsioloudis, Vukica Jovanovic, and Mildred Jones
Teaching Robot Kinematics For Engineering Technology Students Using a Created Three-Dimensional Robot and Camera, Cheng Y. Lin and Yuzhong Shen
An Asynchronous Course/Laboratory Development for Automation Controls, Cheng Y. Lin, Mileta Tomovic, and Vukica M. Jovanovic
Introducing Writing Assignments in Engineering Technology Courses to Enhance Technical Writing Skills and Critical Thinking, Otilia Popescu and Vukica M. Jovanovic
A Combined Direct Analysis and Direct Strength Approach to Predict the Flexural Strength of Z-Purlins with Paired Torsion Braces, Michael W. Seek, Chris Ramseyer, and Ian Kaplan
Modeling of Reliability and Performance Assessment of a Dissimilar Redundancy Actuation System With Failure Monitoring, Wang Shaoping, Cui Xiaoyu, Shi Jian, Mileta M. Tomovic, and Jiao Zongxia
Period Batch Control - A Production Planning System Applied to Virtual Manufacturing Cells, Z. Tesic, B. Stevanaov, V. Jovanovic, M. Tomic, and C. Kafol
Submissions from 2015
Effects of Plasma Processing on Secondary Electron Yield of Niobium Samples, M. Basovic, S. Popovic, M. Tomovic, L. Vuskovic, A. Samolov, and F. Cuckov
Secondary Electron Yield of Electron Beam Welded Areas of SRF Cavities, M. Basovic, S. Popovic, M. Tomovic, L. Vuskovic, A. Samolov, and F. Cuckov
Preparing Students for the Advanced Manufacturing Environment Through Robotics, Mechatronics, and Automation Training, Ana M. Djuric, Vukica Jovanovic, and Tatiana V. Goris
What Does it Take to Deliver an Active Hands-on Course?, Steve C. Hsiung and Feng Jao
College Students' Perceptions of Sustainability: A Regional Survey, Michael Myung Jeong, Younghan Jung, and Dan Daehyun Koo
Integration of Mechatronics Design Approach into Teaching of Modeling Practices, Vukica M. Jovanovic, Tatiana V. Goris, Ana M. Djuric, Petros J. Katsioloudis, Nathan J. Luetke, Moustafa R. Moustafa, and Basim Matrood
Comparatively Mapping Genres in Academic and Workplace Engineering Environments, Vukica M. Jovanovic, Megan McKittrick, Pilar Pazos, Daniel Richards, and Julia Romberger
Addressing New Skills Needed for the Automotive Industry through a Motorsports Educational Pathway, Vukica M. Jovanovic, Mileta M. Tomovic, Alok K. Verma, Nathan Luetke, and Steve Branch
Evaluation of Static Vs. Dynamic Visualizations for Engineering Technology Students and Implications on Spatial Visualization Ability: A Quasi-Experimental Study, Petros Katsioloudis, Daniel Dickerson, Vukica Jovanovic, and Mildred Jones
Mechatronic Education at the Faculty of Technical Sciences Novi Sad, Gordana Ostojić, Vukica Jovanović, Drazan Kozak, Zeljko Ivandić, and Stevan Stankovski
Effects of Gravity on the Acceleration and Pair Statistics of Inertial Particles in Homogeneous Isotropic Turbulence, H. Parishani, O. Ayala, B. Rosa, L.-P. Wang, and W. W. Grabowski
The Use of Polleverywhere in Engineering Technology Classes to Student Stimulate Critical Thinking and Motivation, Otilia Popescu, Laura C. Chezan, Vukica M. Jovanovic, and Orlando M. Ayala
Effects of Forcing Time Scale on the Simulated Turbulent Flows and Turbulent Collision Statistics of Inertial Particles, B. Rosa, H. Parishani, O. Ayala, and L.-P. Wang
Submissions from 2014
Strategies for Effective Online Course Development, Carol L. Considine, Michael W. Seek, and Jon Lester
Simulating Real-World Work Experience in Engineering Capstone Courses, Thomas H. DeAgostino, Vukica M. Jovanovic, and M. Brian Thomas
Teaching Laboratory Courses Using Distance Learning Technologies, Steve C. Hsiung and John Ritz
Delivery of Hands-On Technical Courses Through Real-Time Distance Learning, Steve C. Hsiung, John M. Ritz, Ece Yaprak, and Feng Jao
Dissemination of Microprocessor Courses Through Classroom and Interactive Cyber-Enabled Technologies, Steve C. Hsiung, John M. Ritz, Ece Yaprak, Thomas B. Stout, and Richard L. Jones
Enabling Multidisciplinary Perspective in Student Design Project: Fast Fashion and Sustainable Manufacturing Systems, Vukica M. Jovanovic, Manveer Mann, Petros J. Katsioloudis, and Daniel L. Dickerson
Implementing Mechatronics Design Methodology in Mechanical Engineering Technology Senior Design Projects at the Old Dominion University, Vukica M. Jovanovic, Jennifer G. Michaeli, Otilia Popescu, Moustafa R. Moustafa, Mileta Tomovic, Alok K. Verma, and Cheng Y. Lin
Review of Development Stages in the Conceptual Design of an Electro Hydrostatic Actuator for Robotics, Velibor Karanović, Mitar Jocanović, and Vukica Jovanović
Spatial Visualization Ability and Impact of Drafting Models: A Quasi Experimental Study, Petros J. Katsioloudis and Vukica Jovanovic
A Comparative Analysis of Spatial Visualization Ability and Drafting Models for Industrial and Technology Education Students, Petros Katsioloudis, Vukica Jovanović, and Mildred Jones
Relative Permeability of Homogenous-Wet and Mixed-Wet Porous Media as Determined by Pore-Scale Lattice Boltzmann Modeling, C. J. Landry, Z. T. Karpyn, and O. Ayala
Hands-on Homework or Laboratory Development for Distance Learning Students in Programmable Logical Controller (PLC), Cheng Y. Lin, Yuzhong Shen, and Mileta Tomovic
Lessons in On-Campus and Distance Learning Delivery of an Introductory Naval Architecture Course, Jennifer G. Michaeli
Initial Investigation of Analytic Hierarchy Process to Teach Creativity in Design and Engineering, Jennifer G. Michaeli, Gene Hou, Xiaoxiao Hu, and May Hou
An Initial Look at Robotics-based Initiatives to Engage Girls in Engineering, Jennifer Michaeli, Vukica Jovanovic, Otilia Popescu, Ana Djuric, and Ece Yaprak
A Collaborated Process with a Wireless Autonomous Vehicle at it's Center, Thomas B. Stout and Steve C. Hsiung
A Third-Year Review of Design and Packaging of Sensor Systems, M. Brian Thomas, Andrea Mitofsky, Vukica Jovanovic, and John Eiler
Enhancing Agility of Supply Chains Using Stochastic, Discrete Event and Physical Simulation Models, Alok K. Verma
Submissions from 2013
Complementarities of Probabilistic and Evidence Approaches: An Uncertainty Assessment for Selection of Composite Material, Stella B. Bondi, Resit Unal, Patrick T. Hester, and Trina M. Chytka
Web-Based Virtual Learning for Digital Manufacturing Fundamentals for Automotive Workforce Training, Vukica Jovanovic and Nathan W. Hartman
Design and Practical Application of an Innovative, Pneumatically Latched Valve, Cheng Y. Lin, Jennifer G. Michaeli, and Nathan J. Luetke
Clarifications of a Datum Axis or Centerplane Specifying in Maximum Material Condition of Geometric Dimensioning and Tolerancing, Cheng Y. Lin, Jennifer G. Michaeli, and Mileta Tomovic
Kinematic and Dynamic Collision Statistics of Cloud Droplets From High-Resolution Simulations, Bogdan Rosa, Hossein Parishani, Orlando Ayala, Wojciech W. Grabowski, and Lian-Ping Wang
Turbulent Collision-Coalescence in Maritime Shallow Convection, A. A. Wyszogrodzki, W.W. Grabowski, L. P. Wang, and Orlando Ayala
Submissions from 2012
Implement Smart Sensors With Wireless Communication Protocols With Embedded Microcontrollers in a Capstone Project Design, Steve C. Hsiung, Cory T. Gleason, Lacides A. Osorio, and Charles H. McGinn
Automation Laboratory Development Focusing on Industrial Hands-on Experience, Simulation Software, and Application Research Projects, Cheng Y. Lin and John R. Hackworth
Impact of STEM Focused Project Based Learning Activities on Career Education for K-12 and Community College Students, Alok K. Verma
Submissions from 2011
Design and Implement a Cost-Effective Wireless Communication Project on a PIC Training System, Steve Hsiung, Walter F. Deal, Lacides Agustin Osorio, and Mathew Henderson
Kinematic and Dynamic Pair Collision Statistics of Sedimenting Inertial Particles Relevant to Warm Rain Initiation, Bogdan Rosa, Hossein Parishani, Orlando Ayala, Lian-Ping Wang, and Wojciech W. Grabowski
Attracting K-12 Students Towards Engineering Disciplines With Project Based Learning Modules, Alok K. Verma
Impact of Project Based Learning in Introduction to Engineering/Technology Class, Alok K. Verma
Towards an Integrated Multiscale Simulation of Turbulent Clouds on PetaScale Computers, Lian-Ping Wang, Orlando Ayala, Hossein Parishani, Wojciech W. Grabowski, Andrzej A. Wyszogrodzki, Zbigniew Piotrowski, Guang R. Gao, Chandra Kambhamettu, Xiaoming Li, and Louis Rossi
Submissions from 2010
Modified Sequential Kriging Optimization for Multidisciplinary Complex Product Simulation, Wang Hao, Wang Shaoping, and Mileta M. Tomovic
ExCEEd II: Advanced Training For Even Better Teaching, Debra Larson, Allen Estes, Norman Dennis, Ronald Welch, and Carol Considine
Submissions from 2009
A Comparison of Instructional Delivery Methods Based on Student Evaluation Data, John Hackworth, Carol Considine, and Vernon Lewis
Analysis of Possible Use of Identification Technologies in Disassembly, Vukica Jovanović, Sreten Filipović, Gordana Ostojić, Stevan Stankovski, and Milovan Lazarević
System Design And Integration For Repeated Impact Tests, Cheng Lin, Gene Hou, Sebastian Bawab, Timothy Coats, and Hesham Nassar
International Service Learning Projects for Senior Capstone Projects, Steve Reichle, Avery Bang, and Carol Considine
Submissions from 2008
Measuring Agility of Organizations - A Comprehensive Agility Measurement Tool (CAMT), Ameya S. Erande and Alok K. Verma
ExCEEd Teaching Workshop: Tenth Year Anniversary, Allen Estes, Ronald Welch, Stephen Ressler, Norman Dennis, Debra Larson, Carol Considine, Tonya Nilsson, Jim O'Brien, and Thomas Lenox
Design and Develop a Cost Effective Microcontroller Training System for Distance Learning Engineering Students, Steve Hsiung, John Ritz, and James Eiland
An Integrated Simulation Design With Three-Dimensional Motions and a Hydraulic Stewart Simulator, Cheng Lin, Gene Hou, Yuzhong Shen, and Hector Garcia
Applying Six Sigma Methodology to the Admissions Process in Higher Education, Alok Verma
Submissions from 2007
Multi-Phase Flow Analysis in Oil and Gas Engineering Systems and its Modelling, Orlando F. Ayala, Luis F. Ayala, and Orlando M. Ayala
Introducing Freshmen to Construction Estimating and Scheduling Using K'NEX Bridge Kits, Carol Considine and Vernon Lewis
A General Engineering Technology Program in Motorsports Technology, Gary Crossman and Anthony Dean
Addressing Student Retention in Engineering and Engineering Technology Through the Use of a Multidisciplinary Freshman Course, Anthony Dean, Bonita Anthony, and Linda Vahala
Using Basic Computer Aided Drafting and Design Courses at the Freshman Level to Improve Technology Students Competitiveness in Obtaining Early Academic Career Internships, Anthony Dean, Mustafa Moustafa, and Julie Moustafa
Managing a Distance-Learning EET Laboratory Course Using Collaboration Software, Steve Hsiung, John Hackworth, Richard Jones, and June Ritchie
Identifying University Minors to Support The Construction Specialization Area Within a Civil Engineering Technology Program, Vernon Lewis and Carol Considine
Clarifications of Rule 2 in Teaching Geometric Dimensioning and Tolerancing, Cheng Lin and Alok Verma
Enhancing Student Learning in Engineering Technology Programs? A Case for Physical Simulations, Alok Verma
Stochastic Models For Enhancing Agility of Supply Chains, Alok K. Verma
Training for Adjunct Faculty, Ronald Welch, Allen Estes, and Carol Considine
Submissions from 2006
Introducing the Engineering Technology Programs to All Incoming Freshmen Engineering and Technology Students–The Result Is Better for All, Gary Crossman and Anthony Dean
Developing a New Program in Marine Engineering Technology, Anthony Dean, Gary Crossman, and Alok Verma
A Comparison Between Frequent Out-Of-Class Assignments and Frequent In-Class Assessments Relative to Student Performance in a Sophomore Level Electrical Circuit Analysis Course, Isaac Flory and Christian Hearn
Designing a Microcontroller Training Platform for Active Distance Learning Engineering and Technology Students, Steve C. Hsiung, James E. Eiland, John R. Hackworth, and John Ritz
A New Approach in Microprocessor/Microcontroller Courses/Laboratories Material Design and Development, Steve C. Hsiung and Jeff Willis
A Hybrid Course in Fundamentals of Building Construction Using Combination Archived Video and Live Session Distance Learning, Vernon W. Lewis Jr., Carol L. Considine, and June Ritchie
RFID Technology Use in Assembly and Disassembly Processes, Gordana Ostojić, Milovan Lazarević, Vukica Jovanović, Stevan Stankovski, and Ilija Ćosić
Using RFID Technology in Collaborative Design of the Assembly Systems, Stevan Stankovski, Gordana Ostojić, Vukica Jovanović, and Branislav Stevanov
Teaching Lean Manufacturing Concepts Using Physical Simulations Within Engineering Technology Program, Alok Verma
An Assessment and Continuous Improvement Model for Engineering Technology Programs, Alok Verma and Gary Crossman
Submissions from 2005
Lessons Learned and Best Practices for Using an Analytic Strategy Approach for the Creation of Virtual Laboratories for Distance Learning in Engineering Technology, Anthony W. Dean, Carol L. Considine, and Gary R. Crossman
The Administration of Senior Design Projects in a Distance Learning Environment, Isaac L. Flory IV and John R. Hackworth
Implementing Simple Protocols In Multiple Processors Control Applications, Steve Hsiung, Tyson McCall, and Corinne Ransberger
Privatization Initiatives: A Source for Engineering Economy Case Studies, Paul Kauffmann, Tarek Abdel-Salam, Keith Williamson, and Carol L. Considine
A Template Functional-Gage Design Using Parameter-File Table In Autodesk Inventor, Cheng Lin and Moustafa Moustafa
Physical Simulations in Classroom as a Pedagogical Tool for Enhancing Manufacturing Instruction in Engineering Technology Programs, Alok K. Verma, Han P. Bao, Anand Ghadmode, and Swanand Dhayagude
Submissions from 2004
Design, Development, and Delivery of Certificate Programs for Funding Opportunities and Industry Collaboration, Carol Considine and Paul Kauffmann
Assessment Methods for Comparison of On-Camps and Distance Learning Laboratory Courses in an Engineering Technology Program, John R. Hackworth and Richard L. Jones
An Integration of PC Hardware & Software in Teaching Engineering Technology Courses, Steve Hsiung and Richard Jones
Project-Based Freshmen Engineering Courses in Civil Engineering Technology, Vernon W. Lewis Jr. and Carol L. Considine